Girus Group - Waste saving solutions for the printing industry

Fusion Features

All Fusion products are supplied with a Register Mark Memory. This extremely useful Fusion feature allows storage of the camera position for a register mark or similar region of interest.

At any time afterwards the stored position can be recalled with a single press of the Register Mark button, instantly directing the camera back to the stored position and with the same zoom magnification.

Register Mark Memory saves significant time that printers normally spend searching for register marks, or similar, and allows them to spend more time producing quality print.




	Fusion Features Rich in features Fusion products offer as standard a rich set of waste saving and productivity enhancing features that are commonly only available as optional extras on equipment from other manufacturers. These features enable the user to be more effective at identifying print defects and are very easy to use and control from the on screen graphical menu. The features described below are standard equipment on all Fusion products ensuring that the user gains the maximum benefit possible irrespective of which model they choose. Dynamic Scan Dynamic Scan is a completely automated mode of viewing the web and provides the fastest most complete inspection of a large printed area. For systems with a manual traverse Dynamic Scan only operates along the length of the web. For motorised systems Dynamic Scan provides 100% scanning of the repeat both longitudinally and laterally, whereby the camera is continuously on the move providing complete coverage of the web in the minimum of time. Dynamic step adjustment allows fine-tuning of the scan sequence for total control viewing and maximum print quality. Label / Copy Checking If your print is produced with more than one label / image copy per rotation of the print cylinder then the label / copy checking program will automatically move along the web after each image has been taken ensuring that each copy is viewed in turn. Hyper-strobe Hyper-strobe is a clever feature of all Fusion products that make life so much easier for the printer. When moving manually around the web, or zooming the lens, the flash rate and image capture frequency automatically increases providing enhanced awareness of camera position and superior more intuitive control for the user. Register Mark Memory When the camera is viewing an important part of the web, for example a register mark, this position can be stored in the Fusion's memory. A single press of a button at any time later will cause the camera to automatically travel back to that same position once again. This reduces the time that your operators spend at the controls of the web inspection system leaving them more time to produce quality print. Split Screen Imaging This feature allows the printer to store an image on the right hand side of the screen for comparison with a real time image on the left hand side of the screen. This invaluable feature will help with cross web colour comparison, and will help maintain colour consistency throughout the print run. Image Flip This function rotates the camera image 180 degrees. It is useful when the web is being printed upside down and corrects the image so that the printer views text and detail more naturally.

Site terms and conditions